How to maintain your swimming pool in 2023 | Step by step
Chemical Balance
One of the most important aspects of pool maintenance is ensuring that the chemical balance is correct. This includes the pH level, total alkalinity, and chlorine levels. The pH level should be between 7.2 and 7.8, total alkalinity should be between 80 and 120 ppm, and chlorine levels should be between 1 and 3 ppm. To test the chemical balance of your pool, you will need a test kit. These kits can be purchased at most pool supply stores and come with instructions on how to use them. Once you have your test results, you can use chemicals to adjust the levels as needed. It's important to note that adding chemicals to your pool can be dangerous if not done properly. Always read the instructions carefully and use the correct amount of chemicals. If you are unsure about how to handle chemicals, it may be best to hire a professional pool maintenance company to do the job for you.
Cleaning the Pool
Cleaning your pool regularly is essential to keeping it in top shape. This includes cleaning the walls, floor, and waterline of the pool, as well as the skimmer and pump baskets.
To clean the walls and floor of the pool, you can use a pool brush and vacuum. The pool brush is used to scrub the walls and floor, while the vacuum is used to suck up dirt and debris. It's important to use the correct brush for your pool's surface (e.g. a vinyl brush for a vinyl-lined pool). The waterline of the pool should also be cleaned regularly to remove any buildup of dirt and algae. This can be done with a waterline tile brush and a cleaning solution. The skimmer and pump baskets should be cleaned at least once a week to remove any debris that has been collected there. This will ensure that the water is flowing properly through the pool's circulation system.
Cleaning the filter
The filter is an important part of the pool's circulation system and should be cleaned regularly to ensure that it is working properly. There are three types of filters: sand, cartridge, and DE. Each type requires a different cleaning method, so it's important to know which type of filter you have.
Sand filters should be backwashed every 2-4 weeks, depending on usage. This involves reversing the flow of water through the filter to flush out dirt and debris. Cartridge filters should be cleaned every 2-4 weeks, depending on usage. This involves removing the filter cartridge and cleaning it with a hose or a cartridge cleaning solution filters should be back washed every 2-4 weeks, depending on usage. This involves reversing the flow of water through the filter to flush out dirt and debris. The DE powder should also be added every 2-4 weeks, depending on usage.
Water Level
The water level in your pool should be maintained at the correct level to ensure that the pool's circulation system is working properly. The water level should be halfway up the skimmer. If the water level is too low, the pump may suck air, causing damage to the pump. If the water level is too high, water may overflow and be wasted. To add water to the pool, use a hose and fill the pool until the water level reaches